Zoning bylaws can be a little intimidating.
Open one for the first time and you’ll be looking at hundreds of pages of definitions, regulations, tables and exceptions. Even for experienced planners and developers, some can resemble a complex riddle.
While zoning bylaws are only one layer of regulation impacting your property, they are critical to understanding your site’s development potential.
If you’re reviewing your own site, or looking to improve your development chops, here are some tips for reading a zoning bylaw.
Let’s start with the basics.
Step 1: Find Your Zone
Before opening the zoning bylaw and starting at page 1 (please don’t do that), confirm the property’s zoning.
Most municipalities now have fairly good online mapping systems. You can search the municipality’s website using terms like “zoning map,” “GIS map” or “interactive map.”
In Metro Vancouver, for example, Surrey has COSMOS, Burnaby has BurnabyMap and Coquitlam has QtheMap. These are all very good resources.
Enter the property address and look for the zoning designation.
You might see something like R3, RM2, C2 or M1. The exact terminology varies considerably between municipalities, so don’t assume a zone means the same thing from one city to another. It doesn’t.
A side note: if you see CD zoning on your property, that complicates matters and it’s best to touch base with the municipality. You can read more here to learn What is CD Zoning?
Once you have the zone determined, find that specific section of the zoning bylaw.
That’s a good place to start.
Step 2: Read the Intent
Many zones begin with a short statement explaining what the zone is intended to achieve.
You’re going to want to skip this section and get right to the density limits. I get it.
The intent might be something like this: to support a pedestrian-oriented, mixed-use neighbourhood…or maybe to accommodate low-density residential development…or to provide areas for industrial and employment uses.
I understand this can seem unimportant, but it gives you context and insight on where to look for value opportunities.
If everything you’re proposing fits neatly within the zoning requirements, the intent may not matter very much. But if you’re looking for an interpretation, relaxation or variance, understanding what the municipality is trying to achieve becomes much more important.
A proposal that technically requires some flexibility but still supports the intent of the zone is a very different conversation from one that works against it.
Despite reading this, some of you are still going to skip this step.
Step 3: Review the Permitted Uses
Next, find the list of permitted uses.
This tells you what land uses are allowed on the property.
For a straightforward residential property, this can be relatively simple. The zone might permit single-detached homes, duplexes, townhouses or apartments. Easy.
Commercial and industrial properties can become much more complicated.
A zoning bylaw might allow:
- retail;
- manufacturing;
- warehousing;
- offices; or
- various service uses.
This can sound straightforward, but there are so many different types of businesses, and each city deals with them differently. Is a tool rental business considered retail? Or industrial? Different zoning bylaws actually treat this business differently.
For this, we need to understand how the City understands these terms and definitions.
Step 4: Read the Definitions
If the zone says “retail” is permitted, your next question should be:
How does this zoning bylaw define retail?
Go to the definitions section and check.
The same applies to terms like manufacturing, warehouse, restaurant, office, personal service, accessory use and dozens of others.
I know this may seem obvious, but let me tell you why it matters.
I was working with a purchaser considering a property to develop a grocery store. The zoning permitted “retail,” so their initial assumption was straightforward:
Grocery is retail. Retail is permitted. We’re good.
Their team was getting ready to move forward with the purchase when I was asked to look at the site. I jumped into the zoning bylaw and noticed, the definition of retail did not include a grocery store. This municipality considered grocery stores to be it’s own separate use.
Had they not checked, they would have purchased a site that would have required a rezoning (no small feat) in order to build what they planned to build.
This is why reading a zoning bylaw often isn’t linear. You need to bounce around the document.
You’ll start at the zone itself, and then flip back to the definitions, and then back to permitted uses, and then back to exceptions etc.
This is normal.
Okay, next step is looking for flexibility.
Step 5: Pay Attention to the Words
As you’re reading, pay attention to the language the municipality uses.
Words like:
“shall,” “must” and “is required”
generally signal a firm requirement. Not much flexibility in these words.
Other wording may leave room for interpretation or discretion:
“may,” “may permit,” “at the discretion of…”
If the bylaw says a building shall be set back 6 meters from the property line, you should generally begin your analysis assuming you need 6 meters.
If another provision says something may be varied or approved by a designated official, there may be a pathway to something different. You’re going to want to jot that down.
That doesn’t mean you’ll automatically get the flexibility you’re looking for. But it tells you where flexibility may exist—and where it probably doesn’t.
You’re Building a Picture
At this first stage, you aren’t trying to understand every provision in a 400-page zoning bylaw.
You’re building the first layer of your understanding:
What is the property zoned?
What is that zone trying to achieve?
Is my proposed use permitted?
How does the municipality define that use?
And where does the bylaw provide—or not provide—flexibility?
In Part 2, we’ll dig into the part everyone goes directly to: setbacks, building height, density etc.
Could You Benefit From Real Estate Development Guidance?
If you’re considering developing a property and need help understanding its potential, SiteMentor Development Consultants can help assess your development options, identify key risks, review the financial viability and provide greater clarity before you move forward.


