In Part 1, we looked at how to find your property’s zoning, understand the intent of the zone and determine whether your proposed use is allowed.
Here in Part 2, we’re going to look at density.
My guess is this is the section of the zoning bylaw you jumped to right away. And I get it. If you’re trying to understand the development potential of a site, that’s natural.
Density regulations like FAR, FSR, and unit limits, give you important information about how much you may be able to build.
But understanding the value and development potential of a site takes more than simply finding the maximum FAR in the bylaw.
Let’s start with the basics.
What Does Density Actually Mean?
Put simply, density is a measure of how much development can be accommodated on a site.
Municipalities regulate it in different ways. Depending on the municipality and type of development, you might see:
- a maximum number of units per acre or hectare;
- a maximum Floor Area Ratio (FAR) or Floor Space Ratio (FSR);
- indirect limits on density, such as floor plate size or number of storeys; or
- some combination of these.
FAR and/or FSR are two of the most common ways of regulating density.
Despite the different terminology, the basic concept is relatively simple: it’s a ratio between the floor area you’re permitted to build and the size of your property.
Here’s a quick example.
Imagine you own a 10,000 sq. ft. property.
At 1.0 FAR, you could theoretically build 10,000 sq. ft. of floor area.
At 2.0 FAR, that becomes 20,000 sq. ft.
At 3.0 FAR, it’s 30,000 sq. ft.
Fairly straightforward, right?
But, as urban planning students are quickly taught, FAR doesn’t necessarily tell you what the building will look like.
That 20,000 sq. ft. could theoretically be spread across two 10,000 sq. ft. floors, four 5,000 sq. ft. floors, or another configuration entirely.
The nice thing about FAR and FSR is that the basic math is easy. If you know your site area and the maximum FAR, you know how much floor area you’re allowed.
Right?
Well, not entirely. Let’s dig a bit deeper.
The Maximum Density May Not Be Achievable
The specific density limit is only one regulation affecting your site.
Setbacks, height limits, lot coverage, parking, loading, servicing and other requirements can all restrict how much of that theoretical density you can actually build.
And then there’s another important constraint that isn’t found in the zoning bylaw at all:
Financial Feasibility.
The City of Langley offers a nice example of this constraint.
The City of Langley’s zoning bylaw has, for a while now, allowed high density in its core locations. Currently, there are many sites that are zoned to allow 5.0 FAR. At this density a 30,000 sq.ft. site would allow a 150,000 sq.ft. building.
While there has been a lot of development in the City of Langley, the maximum allowed density hasn’t materialized.
Why?
The answer may be found, at least in part, in challenging soil conditions. Poor soils, groundwater and the cost of excavation can make additional levels of underground parking extremely expensive. This is the case in many areas in the City.
At some point, the revenue from additional units isn’t enough to offset the additional construction cost required to build them.
This constraint can of course change over time with strong market demand.
Let’s look at other constraints that limit density.
Limits to Industrial Properties
You’ll see a similar issue with industrial properties throughout Metro Vancouver.
Many industrially zoned sites throughout Metro Vancouver allow densities of 1.0 FAR. However, that limit is rarely achieved.
Why?
Well, because the building isn’t the only thing that needs to fit on the site.
You may also need parking, loading areas, truck courts, fire access, setbacks and space for vehicles to actually maneuver. While you could do multiple floors, this becomes a financial challenge for industrial properties.
Let’s look at an example of a city in Metro Vancouver that has moved away from FAR/FSR.
What if There Isn’t an FAR?
The City of Burnaby has recently taken an different approach to regulating density.
Rather than relying on a conventional FAR limit, their regulations place greater emphasis on the form of the building…things like maximum height and permitted floor plate sizes.
In that type of regulatory framework, you can’t simply find the FAR, multiply it by the site area and arrive at your answer.
While it may not be as straightforward, there could be opportunities for finding value.
Sometimes Density Is Limited by Use
In mixed use properties, the density can be limited by use.
Vancouver’s I-2 industrial zoning is a good example. Leasing these buildings can become a land-use planning riddle. Not a fun riddle.
The zone permits a maximum density of 3.0 FSR for a number of industrial-type uses, including manufacturing, transportation and storage, wholesale and certain service uses.
But keep reading.
The bylaw limits other uses to a combined 1.0 FSR and then places additional restrictions on certain individual uses. Retail uses, for example, are generally limited to 1,000 m², while general office and health care office combined cannot exceed the greater of 235 m² or 33.3% of the total gross floor area.
So you may technically have 3.0 FSR built, but leasing it up with tenants that meet the zoning will be challenging.
A Few Things to Look For
Here are a couple quick tips when digging into the density limits in a zoning bylaw.
Check how floor area is defined. What actually counts toward FAR or FSR? Municipalities may exclude certain spaces or calculate floor area differently.
Look for exclusions and exemptions. Parking, mechanical areas, balconies, amenity spaces or other areas may be treated differently. Small exclusions can add up on a large project.
Look for density allocated by use. As we mentioned with Vancouver’s I-2 zoning, the overall density may not apply equally to every permitted use.
Check for bonus density or conditions. Additional density may be available, but only if certain requirements are met.
Don’t go over…Unless You’re Rezoning. In British Columbia’s Local Government Act, you cannot vary the allowed density with a Development Variance Permit. That means, if you go beyond the allowed zoning, you need to apply for a zoning amendment (a rezoning).
Good luck and keep looking for value.
Want to Develop Your Property?
If you’re considering developing a property and need help understanding its potential, SiteMentor Development Consultants can help assess your development options, identify key risks, review the financial viability and provide greater clarity before you move forward.


